Aerocool Atomic-G-Bk-V1
Atomic
High-performance mini tower case with a mesh front panel design for increased air circulation and viewing of your front LED fan. Wide and sturdy chassis design supports two additional vertical expansion slots, allowing you to install your graphics card at a vertical position. Full tempered glass side panel with a convenient hinge mechanism and handle allows for easy opening and closing while showcasing the inside of your rig.Two rubber cable grommets and two cable passthrough tubes on the motherboard tray allow for efficient cable management while keeping your cables neat and secure. Comes equipped with one 20cm ARGB fan in the front and one 12cm ARGB fan in the rear of the case that can be controlled via ARGB motherboard or LED control button.SPACIOUS INTERIOR FOR MAXIMUM PERFORMANCEFeaturing a chassis design focused on delivering increased interior space, you now have more freedom and possibilities with your components. With more room for your graphics card, coolers and fans, and even your motherboard, the Atomic will allow you to fully maximize the performance of your PC build.Built with two additional vertical expansion slots, this case allows you to install your graphics card at a vertical position.GPU BRACKET FOR OPTIMAL GRAPHICS CARD INSTALLATIONIncludes a GPU bracket that keeps your graphics card stable and secure while preventing it from sagging. Depending on the size of your graphics card, you can adjust the height and width of the GPU bracket accordingly. ADDRESSABLE RGB COMPATIBLETake full control of your Addressable RGB fans using one of two ways:- RGB LED control button on top of the case- Addressable RGB motherboardTWO ADDRESSABLE RGB FANS INCLUDEDComes equipped with one 20cm ARGB fan in the front and one 12cm ARGB fan in the rear of the case to add a stylish flair to your rig.FULL TEMPERED GLASS SIDE PANEL WITH HINGE DESIGNFull tempered glass side panel with a convenient hinge mechanism and handle allows for easy opening and closing while showcasing the inside of your rig.EFFICIENT CABLE MANAGEMENTComes equipped with two rubber cable grommets and two cable passthrough tubes on the motherboard tray to keep your cables neat, tidy, and secure.IMPROVED AIR VENTILATIONMesh front panel design allows for increased air ventilation and viewing of your front LED fan.AIR COOLINGSupports air cooling in the front, top, and rear of the case to enhance cooling performance.- Front: 120mm x 2 or 140mm x 2 or 200mm x 1 (200mm ARGB Fan x 1 included)- Top: 120mm x 2 or 140mm x 2 (Max.)- Rear: 120mm x 1 or 140mm x 1 (120mm ARGB Fan x 1 included)LIQUID COOLINGSupports liquid cooling in the front, top, and rear of the case for maximum efficiency cooling.- Front: 120/240/280mm Radiator (Optional)- Top: 240mm Radiator (Optional)- Rear: 120mm Radiator (Optional)BUILT FOR HIGH PERFORMANCE- Supports Micro-ATX and mini-ITX motherboards- Supports CPU cooler up to 184mm (104mm if mounting GPU vertically)- Supports high-end graphics cards up to 347mm (without front radiator)CONVENIENT ACCESS TO YOUR MEDIAQuick and easy access to LED control button, USB3.0 x 2, HD audio and mic ports, and power & reset button.STORAGE CAPABILITYSupports up to 2 x 3.5HDDs (1 x 3.5 and 1 x 3.5/2.5) and 4 x 2.5 SSDs (3 x 2.5 and 1 x 2.5/3.5).EASY MAINTENANCEComes equipped with removable top and bottom dust filters for convenient cleaning and maintenance.Mini Tower, Micro ATX/mini-ITX, 230 x 390 x 403.5mm, 2x USB 3.0
Aerocool Atomic. Form factor: Mini Tower, Type: PC, Product colour: Black. Supported power supply form factors: ATX. Front fans installed: 1x 120 mm, Front fans diameters supported: 120,140 mm, Rear fans diameters supported: 120,140 mm. Supported HDD sizes: 2.5,3.5". Width: 230 mm, Depth: 403.5 mm, Height: 390 mm
08/09/2020