HyperX FURY Memory Black 4GB DDR4 2133MHz, 4 GB, 1 x 4 GB, DDR4, 2133 MHz, 288-pin DIMM, Black
Memory Black 4GB DDR4 2133MHz
Hx421c14fb/4 4Gb 512M X 64-Bit Ddr4-2133 Cl14 288-Pin Dimm Hyperx Hx421c14fb/4 Is A 512M X 64-Bit (4Gb) Ddr4-2133 Cl14 Sdram (Synchronous Dram) 1Rx8, Memory Module, Based On Eight 512M X 8-Bit Fbga Components Per Module. Each Module Kit Supports Intel® Extreme Memory Profiles (Intel® Xmp) 2.0. Each Module Has Been Tested To Run At Ddr4-2133 At A Low Latency Timing Of 14-14-14 At 1.2V. Additional Timing Parameters Are Shown In The Plug-N-Play (Pnp) Timing Parameters Section Below. Features • Power Supply: Vdd = 1.2V Typical • Vddq = 1.2V Typical • Vpp - 2.5V Typical • Vddspd = 2.2V To 3.6V • Nominal And Dynamic On-Die Termination (Odt) For Data, Strobe, And Mask Signals • Low-Power Auto Self Refresh (Lpasr) • Data Bus Inversion (Dbi) For Data Bus • On-Die Vrefdq Generation And Calibration • Single-Rank • On-Board I2 Serial Presence-Detect (Spd) Eeprom • 16 Internal Banks; 4 Groups Of 4 Banks Each • Fixed Burst Chop (Bc) Of 4 And Burst Length (Bl) Of 8 Via The Mode Register Set (Mrs) • Selectable Bc4 Or Bl8 On-The-Fly (Otf) • Fly-By Topology • Terminated Control Command And Address Bus • Height 1.230” (31.25Mm), W/O Heatsink FURY Memory Black 4GB Module DDR4 2133MHz CL14 DIMM
HyperX FURY Memory Black 4GB DDR4 2133MHz. Component for: PC/Server, Internal memory: 4 GB, Memory layout (modules x size): 1 x 4 GB, Internal memory type: DDR4, Memory clock speed: 2133 MHz, Memory form factor: 288-pin DIMM, CAS latency: 14, Product colour: Black
Lifetime
16/02/2015