Kingston Technology ValueRAM 8GB DDR3 1333MHz Module, 8 GB, 1 x 8 GB, DDR3, 1333 MHz, 240-pin DIMM
8GB DDR3 1333MHz Module
8Gb 2Rx8 1G X 64-Bit Pc3-10600 Cl9 240-Pin Dimm Valueram'S 1G X 64-Bit (8Gb) Ddr3-1333 Cl9 Sdram (Synchronous Dram), 2Rx8, Memory Module, Based On Sixteen 512M X 8-Bit Fbga Components. The Spd Is Programmed To Jedec Standard Latency Ddr3-1333 Timing Of 9-9-9 At 1.5V. This 240-Pin Dimm Uses Gold Contact Fingers. Features • Jedec Standard 1.5V (1.425V ~1.575V) Power Supply • Vddq = 1.5V (1.425V ~ 1.575V) • 667Mhz Fck For 1333Mb/Sec/Pin • 8 Independent Internal Bank • Programmable Cas Latency: 9, 8, 7, 6 • Programmable Additive Latency: 0, Cl - 2, Or Cl - 1 Clock • Programmable Cas Write Latency(Cwl) = 7 (Ddr3-1333) • 8-Bit Pre-Fetch • Burst Length: 8 (Interleave Without Any Limit, Sequential With Starting Address “000” Only), 4 With Tccd = 4 Which Does Not Allow Seamless Read Or Write [Either On The Fly Using A12 Or Mrs] • Bi-Directional Differential Data Strobe • Internal(Self) Calibration : Internal Self Calibration Through Zq Pin (Rzq : 240 Ohm ± 1%) • On Die Termination Using Odt Pin • Average Refresh Period 7.8Us At Lower Than Tcase 85°C, 3.9Us At 85°C ≪ Tcase ≪ 95°C • Asynchronous Reset • Pcb: Height 1.18” (30Mm), Double Sided ComponenValueRAM's 1G x 64-bit (8GB) DDR3-1333 CL9 SDRAM (Synchronous DRAM), 2Rx8, memory module, based on sixteen 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. This 240-pin DIMM uses gold contact fingers.ValueRAM, Kingston's industry standard memory, delivers award-winning performance and legendary Kingston reliability. When you know what you want, you want ValueRAM.ValueRam
Kingston Technology ValueRAM 8GB DDR3 1333MHz Module. Component for: PC/Server, Internal memory: 8 GB, Memory layout (modules x size): 1 x 8 GB, Internal memory type: DDR3, Memory clock speed: 1333 MHz, Memory form factor: 240-pin DIMM, CAS latency: 9
lifetime
18/11/2011