Kingston Technology ValueRAM KVR13N9S8/4, 4 GB, 1 x 4 GB, DDR3, 1333 MHz, 240-pin DIMM, Green
KVR13N9S8/4
4gb 1rx8 512m x 64-bit pc3-10600 cl9 240-pin dimm valueram's 512m x 64-bit (4gb) ddr3-1333 cl9 sdram (synchronous dram), 1rx8 memory module, based on eight 512m x 8-bit ddr3-1333 fbga components. the spd is programmed to jedec standard latency ddr3-1333 timing of 9-9-9 at 1.5v. this 240-pin dimm uses gold contact fingers. features • jedec standard 1.5v (1.425v ~1.575v) power supply • vddq = 1.5v (1.425v ~ 1.575v) • 667mhz fck for 1333mb/sec/pin • 8 independent internal bank • programmable cas latency: 9, 8, 7, 6 • programmable additive latency: 0, cl - 2, or cl - 1 clock • programmable cas write latency(cwl) = 7 (ddr3-1333) • 8-bit pre-fetch • burst length: 8 (interleave without any limit, sequential with starting address “000” only), 4 with tccd = 4 which does not allow seamless read or write [either on the fly using a12 or mrs] • bi-directional differential data strobe • internal(self) calibration: internal self calibration through zq pin (rzq : 240 ohm ± 1%) • on die termination using odt pin • average refresh period 7.8us at lower than tcase 85°c, 3.9us at 85°c < tcase < 95°c • asynchronous reset • pcb: height 0.740” (18.75mm), single sided component4GB DDR3 1333MHz Non-ECC, CL9, 1.5V, Unbuffered, DIMM Module
Kingston Technology ValueRAM KVR13N9S8/4. Component for: PC/Server, Internal memory: 4 GB, Memory layout (modules x size): 1 x 4 GB, Internal memory type: DDR3, Memory clock speed: 1333 MHz, Memory form factor: 240-pin DIMM, CAS latency: 9, Product colour: Green
Lifetime
21/06/2012