Kolink INSPIRE K1, Midi Tower, PC, Black, ATX, micro ATX, Mini-ITX, Acrylic, Steel, Tempered glass, Blue, Green, Red
INSPIRE K1
In recent times, Kolink has built a solid reputation for premium quality yet also affordable cases. Now they have brought out the extremely stylish Inspire K1 RGB Midi-Tower with a stylish acrylic glass side panel and tempered glass front. Behind the front, the case includes two pre-installed 120 mm RGB-LED fans whose lighting looks particularly striking thanks to the honeycomb-shaped frame. The RGB-LED fans are connected to an included controller. An infrared remote control allows users to control the RGB-LED lighting. The tidy interior of the Inspire K1 offers lots of space for high-end hardware. The case also includes adequate space for watercooling and convenient cable management, although these are just a few of the highlights. In spite of the excellent build quality of the case, it remains very affordable and good value for money.Key Features- Designer case compatible with motherboards up to ATX- Acrylic glass side panel and tempered glass front- 2 x Pre-installed 120 mm RGB-LED fans, 1 x 80 mm fan on the back- I/O Panel with 2 x USB 2.0 / 1 x USB 3.0 & HD Audio In/Out- Supports one 240 mm format radiator- 3 x 3.5 and 2 x 2.5" drive slots- Fits graphics cards up to 35 cm in length & CPU coolers up to 15 cm high- Includes fan controller and remote controllerTEMPERED GLASS FRONT & THREE PRE-INSTALLED FANSThe robust chassis consists of millimetre thick SECC steel and is equipped with a lightweight acrylic side panel. The power supply is installed in the upper rear of section of the case, while there is space in the front - beneath the HDD cage - for up to two hard drives. A further HDD can be attached to the rear of the motherboard tray. Alternatively, users can put two 2.5" SDDs there instead. Plenty of space is reserved for cable management. In order to keep your hardware cooler, two 120 mm fans with Rainbow RGB-LED lighting are installed in the front. A pre-installed 80 mm fan is located at the back to help exhaust warm air away from the spacious case. Both front-facing fans are connected to the bundled controller via their 6-pin connector. Also included, a remote control enables users to select from up to 350 different effects. In total the controller can support six further fans and two RGB-LED strips which are obviously available separately. As for those who prefer to watercool their hardware on the other hand, a 240 mm radiator can be installed up front. GPUs may be up to 35 cm long and CPU coolers up to 15 cm in height. Moreover, the I/O panel located at the front also includes a USB 3.0 Type A port in addition to two USB 2.0 ports. Form FactorMid TowerMotherboard SupportATXMicro ATXMini-ITXMaterialSteelAcrylic GlassTempered GlassSide WindowTempered GlassColourBlackCoolingFront: 2 x 120mm (2 x 120mm RGB LED fans included)Rear: 1 x 80mm (1 x 80mm fan included)Radiator MountingsFront: 1 x 240mmDrive BaysInternal 3.5": 3Internal 2.5": 2ExpansionSlots: 7I/O Panel1 x USB 3.02 x USB 2.01 x Audio In/OutClearanceMax VGA Length: 350mmMax CPU Cooler Height: 150mmPower Support1 x Standard ATX up to 160 mm (optional)Dimensions ( W x H x D )175 x 350 x 410mmWeight3.5 kg (approx)ATX/Micro-ATX/Mini-ITX, 2x2.5", 3x3.5", 175x430x350mm, 3.5kg, Black
Kolink INSPIRE K1. Form factor: Midi Tower, Type: PC, Product colour: Black. Power supply location: Rear, Supported power supply form factors: ATX. Front fans installed: 2x 120 mm, Side fans diameters supported: 120 mm, Rear fans installed: 1x 80 mm. Supported HDD sizes: 2.5,3.5". Width: 175 mm, Depth: 410 mm, Height: 350 mm
28/04/2019