Microsemi 8885Q, SAS, Serial ATA III, PCI Express x8, 0, 1, 1E, 5, 6, 10, 50, 60, 12 Gbit/s, MD2, 1024 MB
8885Q
The Microsemi Adaptec maxCache solution delivers an evolved application acceleration benefit with read caching solution and support for fully redundant SSD write caching. Series 8Q adapters can deliver up to 25x improvement in IOPS and 25x reduction in latency compared to HDD-only storage arrays.By using SSDs to cache copies of frequently accessed (aka "hot") data, maxCache exploits the performance capabilities of SSDs to store/access read data from them rather than spinning media. The read caching function is further improved with maxCache 3.0, with additional optimizations to the learned-path algorithm. By caching writes to a redundant SSD cache pool (RAID1, RAID1E or RAID5), maxCache 3.0 leverages the performance and latency capabilities of SSD technology for both read and write workloads.Integration of maxCache 3.0 SSD caching technology is seamless. Series 8Q adapters do not require changes to storage architectures, application software or operating systems.Series 8Q adapters use our third-generation AFM-700 flash-based cache protection module to enable instant battery-free cache protection. Unique for the Microsemi Adaptec 81605ZQ, flash backup is embedded on the board, eliminating the need for a daughterboard.All of the "Q" adapters utilize our Zero-Maintenance Cache Protection (ZMCP), which provides full protection to cached data with no monitoring, maintenance, disposal, or replacement costs. ZMCP features SLC based NAND flash memory with super capacitor technology. During a system power loss, the flash memory-based cache protection can preserve data for years.Advanced Data ProtectionMicrosemi Adaptec RAID Code (ARC) delivers maximum reliability with RAID levels 0, 1, 1E, 5, 6, 10, 50 and 60. ARC also offers RAID Level Migration (the ability to easily migrate RAID levels), Online Capacity Expansion (expand capacity without powering down the server), and Copyback Hot Spare (when a failed drive has been replaced, data is automatically copied from the hot spare back to the restored drive).Microsemi Adaptec maxView Storage ManagerMicrosemi Adaptec maxView Storage Manager provides the powerful features of Microsemi Adaptec Storage Manager in an HTML5 web interface that can be viewed in standard desktop or mobile browsers without the need for separate software installation.- 12 Gbps throughput at each port- 16 native SAS/SATA ports in an LP/MD2 form factor- Microsemi 12 Gbps RAID-on-Chip (ROC)- SAS 3.0 interface and PCIe Gen 3 Host Connection- Maximum performance for up to 16 SSDs (No expander needed)- Preinstalled flash backup Microsemi Adaptec Flash Module (AFM-700) with 2GB NAND flash- Auto configuration of Simple Volume and HBA modes "set it and forget it"- Mini SAS HD connectors and SAS HD cables - for fit and function in dense server consfigurations- Support for up to 256 SAS and SATA devices- Support for SSD, HDD, Autoloader, RBOD, Tape81605Q, 8-Lane PCIe Gen3, 2 x SFF-8643 + 2 x SFF-8644
Microsemi 8885Q. Supported storage drive interfaces: SAS, Serial ATA III, Host interface: PCI Express x8. RAID levels: 0, 1, 1E, 5, 6, 10, 50, 60, Data transfer rate: 12 Gbit/s, Form factor: MD2. Windows operating systems supported: Windows 10, Windows 7, Windows 7 x64, Windows 8, Windows 8 x64, Server operating systems supported: Windows Server 2008, Windows Server 2008 x64, Windows Server 2012, Windows Server 2012 x64,.... Width: 167 mm, Height: 64 mm. PCI Card form factor: Half-height (low-pr
13/02/2017