Tascam US-4X4 not categorized US-4X4

General Information for Tascam

Tascam US-4X4 PC Audio Interface - US-4x4

Tascam US-4X4

4-in/4-out Audio/MIDI Interface with HDDA Mic Preamps and iOS CompatibilityTASCAM’s US-4x4 combines great audio quality and ergonomic design for a powerful 4-in/4-out USB 2 audio interface.Four of TASCAM’s Ultra-HDDA mic/line preamps provide up to 57dB of gain with nearly inaudible noise and distortion specs. The audio design features high-performance musical components like NE5532 op amps for rich sound quality without colouring the source.The US-4x4 includes class-compliant drivers for plug-and-play operation on Mac OSX and iOS devices like the iPad and a simple driver adds ASIO compatibility for Windows. MIDI in and out are also included for connecting synths drum machines and controllers. The interface includes two DAW applications to choose from – both Cakewalk SONAR X3 LE and Abelton Live Lite 9.With solid audio specs iOS compatibility and an easy-to-read angled design the US-4x4 is the ultimate 4-channel interface for home project and mobile studios.Main FeaturesUltra-HDDA Mic Preamps for Clear Audio Quality from All of your MicsTASCAM's own Ultra-HDDA mic preamps are the cleanest quietest and best-sounding from any interface in their range. A gain range of 57dB makes them ideal for any type of mic – dynamic condenser or ribbon. With preamp performance well beyond any interfaces in their price range the Ultra-HDDA preamps on the US-4x4 makes your tracks sound like a record.Discrete Ultra-HDDA Mic Preamps Deliver Low Noise and Low DistortionTASCAM's Ultra-HDDA (High Definition Discrete Architecture) mic preamp design is based on discrete components just like classic professional gear. They achieve an incredible EIN rating of -125 dBu meaning their noise level is practically below the range of hearing. Other impressive specs include a signal-to-noise ratio of 101 dB out-speccing anything in its price range. But instead of judging the design merely by test measurements key components were selected following extensive listening tests.Musical Components like NE5532 Op-amps Used for Input and Output StagesTASCAM uses proven great-sounding components throughout the US-4x4. One example are NE5532 op-amps famously used throughout classic recording consoles and signal processors due to their sweet musical soundXLR and TRS Accept Balanced Mic and Line Level SignalsThe mic input features a professional XLR connector which supplies phantom power for condenser microphones. The US-4x4 is built from heavy duty metal throughout so it stays on your desk even when moving mics around.An additional TRS input jacks is provided for balanced line-level signals from professional processors and synthesizers. Finally the first two inputs can be switched to high-impedance for direct recording of electric guitar and bass. (Only the XLR or 1/4 input can be used not both at the same time.)Wide Gain Range Supports Dynamic and Ribbon MicrophonesNon-powered mics like dynamic and ribbon designs can sound great but they also have a lower output level than condenser microphones. The US-4x4's Ultra HDDA mic preamps not only feature 57dB of gain but also a low-noise design so you don't crank up the noise at the same time. Plug in modern or classic mics and still get plenty of level on your tracks.Rock Out with Amp Simulator Software using the Guitar InputsThe first two channels can be switched to direct guitar inputs. They're ideal for direct recording of electric and acoustic guitar and bass without the need for a preamp. Use them with amp modelling software like the TH2 effect included with SONAR X3. Simple Operation and an All-New USB DriverTASCAM makes installing the US-4x4 a snap whether usnig the built-in class-complient driver or the high-performance ASIO or Core Audio drivers. TASCAM started from scratch on the software developing them in-house through extensive testing resulting in our most robust drivers ever. Also included with the driver software is a simple-to-use on-screen control panel which monitors and adjusts critical interface settings.High Resolution Recording up to 96kHz/24-bitThe US-4x4 records all four channels at up to 96kHz/24-bit resolution. Even if your target is CD or MP3 recording at higher resolutions gives you more to work with in the mix and can result in a smoother sound. The mic preamps and A/D converters work together to capture the clearest signal path whether you work at 96k or at lower sampling rates.USB 2.0 Computer ConnectionUSB 2.0 found on nearly any computer is used as the interface for the US-4x4. Simply connect the interface to any available USB port to supply plenty of bandwidth even for multichannel 96k work. (The US-2x2 and US-4x4 are also compatible with USB 3.0 ports.)Zero-latency Direct Monitoring FunctionEven the most efficient computers and DAW software can produce a slight delay before reaching the outputs which can distract some vocalists and instrumentalists. A Direct Monitoring path is included to monitor the input signal before it is sent to the computer. This allows musicians to concentrate on their performance instead of adjusting for latency delay.Driver Software can be Pre-Installed without the InterfaceThe US-4x4 Windows driver software can be installed without connecting the interface. Simple on-screen instructions walk you through the installation. These interfaces can be used on a Mac without installing a driver but we recommend installing the software to use the control panel.Sleek Industrial Design that Inspires Creativity with a Practical InterfaceBio-Cell Side Panels Add Style and Ergonomic DesignBoth the US-2x2 and US-4x4 include Bio-Cell Side Panels. These removable aluminium panels developed by renowned industrial designers The Box add a unique look to the interfaces as well as angling them on the desktop for increased usability. Angled Orientation is Ideal for Desktop UseThe angled design makes desktop viewing and operation much more comfortable for tabletop use. All other interfaces have their controls on the front or the top of the device causing you to crane your neck to read the knobs and switches. The US-2x2 and 4x4 are at a natural angle making operation easier to keep you creative.Separate Volume Controls for Headphones and Line OutputsThe US-2x2 and US-4x4 include both headphone and line output volume controls. Even when both powered monitors and headphones are connected the user can set an optimum level for each during operation. And when you want to work on headphones you don't need to reach around to switch off your monitors. Class-Compliant Drivers for use with iPad and Other TabletsThe US-2x2 and US-4x4 are built with class-compliant drivers built into the units. Not only does this mean that they can be used with many computers without first installing a driver they also open the possibilities of with tablets such as Apple's iPad. Connect to iPad iPhone or other iOS DevicesUse Apple's Camera Connection Kit to connect the US-2x2 or US-4x4 to an iPad or other iOS device. Utilitze the multichannel audio and MIDI functions with any of the thousands of iOS audio apps like Garage Band or TASCAM's Portastudio app. Class Compliant drivers also allow the interfaces to be used with Android and Windows-based tablets. * A TASCAM PS-P520 AC adapter (included) is necessary to power the US-4x4.* Apple's Camera Connection Kit is not included with this product.* When connected the US-2x2/US-4x4 will not provide power to the iOS device.Tested with Sonar Pro Tools Cubase live Studio One and Garage BandTASCAM has tested the interface operation with all leading DAW software such as SONAR Pro Tools Cubase Live Studio One and Garage Band. Use the interfaces with your favorite Mac or Windows recording applications not just the bundled apps.MIDI Input and Output IncludedStandard MIDI input and output connectors allow connection with the thousands of keyboards drum machines controllers and other sources that employ MIDI connectors. The interfaces can also be used for synchronized operation of multitrack recorders and other external recording equipment.The US-4X4 is built for Multi-Mic RecordingThe four Ultra-HDDA mic preamps on the US-4x4 handle anything from rehearsals to studio recording to live performance. Capture an entire band or just mic up a drum kit. The four TRS jack outputs can feed monitors signal processors or video cameras.The US-4x4 includes an AC adapter – also required for use with iOS devices. By using an audio interface with iPad sound sources like a synthesizer app a richer sound quality can be heard as opposed to using the headphone output alone.Features at a GlanceFunctions common to both the US-2x2 and US-4x4• Ultra-HDDA (High Definition Discrete Architecture) mic preamps with −125dBu EIN• NE5532 op-amps used at the audio input and output stages• Up to 96kHz/24-bit recording• Support for Windows and Mac OS X operating systems• USB 2.0 computer connection• Connect with iPads and other iOS devices• phantom power for all inputs• Two switchable high-impedance inputs• Microphone preamp gain range of 57 dB• Direct monitoring function for zero-latency monitoring• Tough all-metal casing for durability• Angled design provides excellent usability on a desktop• Balanced analog TRS output jacks suitable for connection to powered monitors• Standard TRS headphones output jack• Separate controls for line and headphones output volumes• MIDI input and output• Output sources can be selected in the setting panel• Input sound monitoring can be set to stereo or mono• Input muting function eliminates noise from unused inputs• USB class compliant 2.0 support• License cards included for SONAR X3 LE/Ableton Live Lite 9• Confirmed operation with major DAW software (SONAR ProTools Cubase Live Studio One Garage BandUnique features for the US-4X4• Four Ultra-HDDA mic preamplifiers• Four XLR or TRS (MIC/LINE) inputs with full phantom power• Four TRS analog balanced outputs• Two headphone outputs – each with 45mW/ch output power• Dedicated AC adapter is included