Trendnet TI-PG102I, Managed, L2, Gigabit Ethernet (10/100/1000), Full duplex, Power over Ethernet (PoE)
TI-PG102I
TRENDnets 10-Port Industrial Gigabit L2 Managed PoE+ DIN-Rail Switch, model TI-PG102i, features eight Gigabit PoE+ ports with a 240W PoE budget, and includes two SFP slots that support both 100Base-FX and 1000Base-FX modules for long distance fiber applications. The hardened switch is equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40 75 C (-40 167 F) for industrial environments. Advanced traffic management controls, troubleshooting, and SNMP monitoring support make this a powerful solution for SMB networks.PoE PowerA 240W PoE power budget supplies up to eight Power over Ethernet devices, and includes advanced PoE port controls such as enabling / disabling PoE, power priority, PD alive check, and power scheduling.Integration FlexibilityManaged features include access control lists, VLAN, IGMP snooping, QoS, RMON, SNMP trap, and syslog for monitoring and flexible network integration.Industrial DesignEquipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40 75 C (-40 167 F) for industrial environments.Network Ports8 x Gigabit PoE+ ports, 2 x Gigabit SFP SlotsPoE PowerSupplies up to 30W of PoE+ power per port with a 240W power budgetFull PoE Control Per PortAvailable PoE port controls include enabling / disabling PoE, power priority, PD alive check, and power schedulingTraffic ManagementManaged features include 802.1Q, MAC & Port Isolation VLAN, IGMP Snooping, per port bandwidth control / 802.1p / DSCP / Queue Scheduling (SPQ / WRR), STP / RSTP spanning tree, and link aggregation for flexible network integrationAccess ControlManaged access control features include ACLs, IP-MAC-Port binding, ARP inspection, 802.1X RADIUS, MAC address learning, DHCP snooping and IP Source Guard provides layered network access controlsSystem MonitoringMonitoring features include SNMP v1 / v2c / v3, MIB support, SNMP trap, RMON Groups (1, 2, 3, 9), SMTP alert, syslog, port mirroring, and SFP DDMIDIN-Rail MountIP30 rated metal enclosure includes DIN-rail mounting bracketSwitching Capacity20Gbps switching capacityRedundant PowerDual redundant power inputs with overload current protection (power supply sold separately: TI-S24048, TI-S48048, TI-S12024)Alarm RelayAlarm relay output triggered by power failure of primary and / or redundant powerJumbo FrameSends larger packets, or Jumbo Frames (up to 10KB), for increased performanceWide Temperature RangeA wide operating temperature range of -40 75 C (-40 167 F) allows for installations in extreme hot or cold environmentsShock and Vibration ResistantRated for shock (EN 60068-2-27), freefall (EN 60068-2-32), and vibration (EN 60068-2-6)Grounding PointGrounding point protects equipment from external electrical surges- 8 x Gigabit PoE+ ports- 2 x SFP slots- Supports 100/1000Base-FX fiber SFP modules- PoE power budget: 240W@48VDC or 124W@24VDC- PoE alive check restarts unresponsive PoE powered devices- 20Gbps switching capacity- Hardened IP30 rated metal housing- Includes DIN-rail mounting bracket- Operating temperature range of -40 75 C (-40 167 F)- Supports LACP, STP/RSTP, VLAN, and IGMP Snooping- IEEE 802.1p QoS with queue scheduling support- Bandwidth control per port- Dual redundant power inputs with overload current protection- Alarm output triggered by power failureTI-PG102I, 20 Gbit/s, 8x RJ-45, PoE, 2x SFP, VLAN, QoS, ACL, 160x120x50 mm
Trendnet TI-PG102I. Switch type: Managed, Switch layer: L2. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 8. Full duplex. MAC address table: 8000 entries, Switching capacity: 20 Gbit/s. Networking standards: IEEE 802.1AX,IEEE 802.1D,IEEE 802.1Q,IEEE 802.1ab,IEEE 802.1p,IEEE 802.1w,IEEE 802.1x,IEEE.... DC input voltage: 24 - 57 V. Power over Ethernet (PoE)
13/12/2018