Tripp Lite B070-016-19-IP NetCommander 16-Port Cat5 KVM over IP Switch - 19 in. LCD, 1 Remote + 1 Local User, 1U Rack-Mount, 48.3 cm (19"), 1280 x 1024 pixels, LCD, VGA, USB, PS/2, UL 60950-1 (USA), CAN/CSA (Canada), FCC Part 15 Class A, CE, IEC 6095
B070-016-19-IP NetCommander 16-Port Cat5 KVM over IP Switch - 19 in. LCD, 1 Remote + 1 Local User, 1U Rack-Mount
Tripp Lites B070-016-19-IP KVM Switch gives you a rack-mountable full keyboard, LCD and touchpad in a single console that occupies only 1U of rack space. Easy to install and use, its the optimal solution for controlling up to 16 computers/servers locally, from across the room, down the street or halfway around the globe on a LAN, WAN or Internet.The B070-016-19-IP uses inexpensive, user-supplied Cat5e/6/6a cabling with Server Interface Units so you can control computers/servers located up to 30.5 m away from the switch. This switch features two 10/100 Mbps LAN ports, so if one fails, the other takes over, keeping remote access uninterrupted. Users can switch easily between the 16 ports using an on-screen display (OSD). Multi-level password protection prohibits unauthorized users from accessing the connected computers, and a local user and a remote user can be logged on simultaneously. The built-in 19 LCD screen supports video resolutions up to 1366 x 768.Two serial ports allow control of serial-manageable devices such as IP PDUs, firewalls and routers; you can assign individual ports to an IP PDU port to power on/off the server connected to that port. The B070-016-19-IP stores neatly in a rack drawer and pulls out when needed. This KVM console is compatible with both Windows and Linux operating systems, and provides remote access using a Windows computer. Heavy-duty steel housing stands up to frequent use. Free NetCommander-AXS Management Software is available for access and control of all of your Tripp Lite NetCommander IP KVM switches (B070 and B072 series). From a single interface, you can access server ports on any of your KVM switches, power cycle or power on/off outlets of IP PDU's, and manage KVM settings. This software can be found on the model support page of the B070-016-19-IP, or via searching NetCommander-AXS on www.tripplite.comSaves Space and Money Combines 16-port KVM switch, 19 LCD screen, keyboard and touchpad in a single 1U rack-mountable drawer Mounts into 19-wide rack, 27-42 deep; to mount in a 2-post rack, use Tripp Lites B019-000 Inexpensive Cat5e/6/6a cabling lets you locate servers up to 30.5 m from the switch Use a Server Interface Unit, B078-101-USB-1 (for USB) with each server that will be connected with Cat5 cable To convert DisplayPort or HDMI computers to VGA, use Tripp Lite adapters P134-06N-VGA-V2 or P131-06N. Maximum video resolutions using adapters may vary.IP Remote Access for Fewer Trips to the Server Room Remote access means theres no need to travel to the server room or network closet Java-based application allows Windows computers to control a target server via web browser from any location over a secured IP connection A non-browser client is available that allows Windows computers to remotely access the KVM without the need for a browser and without the need to install Java 1 local + 1 remote user can access different ports concurrently; up to 5 users can share a single session Supports both IPv4 and IPv6 Free Management Software available to Access and Control all of your Tripp Lite NetCommander IP KVM's (B070 and B072 IP series) from a single interface Simplifies IT Tasks On-screen display, hot keys and remote toolbar for easy use 2 serial ports allow control of serial-manageable devices such as IP PDUs, firewalls and routers Add IP PDUs as devices that can be controlled by the KVM; assign individual ports to an IP PDU port to power on/off the server connected to that port Virtual Media allows a .iso file to be mounted to a target server and accessed as if it were directly stored on it Fast Virtual Media KVM System patented under Pat. No. US 9,417,720 System-sent messages to SNMP server notify you of LAN failures Supports RADIUS and LDAP/S authentication Log tracks events on your installationLarge 19 LCD Supports video resolutions up to 1366 x 768; 1920 x 1080 remotely DDC emulation allows for optimal output to LCDAdvanced Security Features Multi-level password protection: create administrator accounts with full access and user accounts with limited access Supports TLS 1.2 security protocol You can install SSL certificates to ensure secure transactions between web servers and browsersLong-Lasting Reliability Flash-upgradeable firmware over the network Heavy-duty steel housing stands up to use Control computers/servers locally or via LAN, WAN or Internet Occupies just 1U of space in a rack-mountable drawer Low-cost Cat5 cabling allows longer distances, reduces cable clutter 19 LCD screen supports video resolutions up to 1366 x 768 Simultaneous support for 2 users 1 local, 1 remote Free Management Software available to Access and Control all of your Tripp Lite NetCommander IP KVM's (B070 and B072 IP series) from a single interface Fast Virtual Media KVM System patented under Pat. No. US 9,417,720System Requirements Computer with HD15 port, and USB port or PS/2 keyboard/mouse ports User-supplied Cat 5e/6/6a cabling B078-101-USB-1 (USB) or B078-101-USB2 (USB) Server Interface Unit is required for each connected computer/server; the B078-101-USB2 is required for Fast Virtual Media speeds up to 12Mbps; the B078-101-USB-1 can be used for Virtual Media, but only at speeds up to 1Mbps For computers with Displayport or HDMI, change to VGA using Tripp Lite adapters P134-06N-VGA-V2 or P131-06N. Maximum video resolutions using adapters may vary. Compatible with Windows and Linux operating systems Currently not compatible with HP Gen 10 Servers Remote access supported using Windows computers Remote console computers require minimum Pentium 4 with 2 GB memory Hardware versions: A new hardware version (v2) of the B070-016-19-IP was released in 2014, and it requires different firmware than was used in the previous version (v1). In the Support tab on this web page you will find a zip folder for the v1 KVM. In addition to including the applicable firmware, it contains a FW Notes file that will tell you how to determine which hardware version you have, and therefore, which firmware you need to use. If you have a v2 KVM, the latest firmware is that which came pre-installed on the KVM. Power consumption: 120V, 60Hz, 30WPackage Includes B070-016-19-IP 1U rackmount console KVM switch with 19 LCD C13 to 5-15P power cord Rackmount hardware CD with owner's manual Quick start guideNetCommander 16-Port Cat5 KVM over IP Switch - 19 in. LCD, 1 Remote 1 Local User, 1U Rack-Mount
Tripp Lite B070-016-19-IP NetCommander 16-Port Cat5 KVM over IP Switch - 19 in. LCD, 1 Remote + 1 Local User, 1U Rack-Mount. Display diagonal: 48.3 cm (19"), Display resolution: 1280 x 1024 pixels, Display: LCD. Interface: VGA, USB, PS/2. Certification: UL 60950-1 (USA), CAN/CSA (Canada), FCC Part 15 Class A, CE, IEC 60950-1. AC adapter input voltage: 100 - 240 V, AC adapter frequency: 50/60 Hz. Width: 440.9 mm, Height: 43.4 mm, Depth: 722.1 mm
1-year limited
04/11/2010