Ubiquiti UFiber Nano G, CE, FCC, IC, 240 MHz, 128 MB, 1000 Mbit/s, 2.488 Gbit/s, 7 W
UFiber Nano G
The UFiber Nano G is a robust, high-performance GPON CPE that features an informational LED display and a sleek, sophisticated industrial design.Status DisplayThe easy-to-read display provides status information: IP address, signal strength, and current throughput.Power over EthernetThe Nano G is powered by 24V passive PoE a single cable to carry both power and data.Designed for IntegrationUp to 128 Nano G devices can be connected to a single GPON port. Supporting GPON links of up to 20 km, the Nano G integrates with the UFiber OLT, UFiber OLT 4 and third-party OLT devices.SpecificationsDisplayYesPower Input24V PassiveNetworking InterfaceGPON (SC/APC), Ethernet (RJ45)Operation ModeBridge or Router (router mode is supported in firmware version 2.0 and higher)Supported OLTsUFiber OLT, UFiber OLT 4GPON, LAN, 2.488 Gbps, 1490 nm/1310 nm, LED Display, 24V Passive PoE
Ubiquiti UFiber Nano G. Certification: CE, FCC, IC. Processor frequency: 240 MHz, Internal memory: 128 MB. Ethernet LAN data rates: 1000 Mbit/s, Data transfer rate: 2.488 Gbit/s. Power consumption (typical): 7 W, Input voltage: 24 V, Input current: 0.3 A. Weight: 110 g, Dimensions (WxDxH): 77 x 77 x 28 mm
Contact Ubiquiti Technical Support via https://rma.ubnt.com/ and obtain RMA reference. Call Target Customer Services with RMA reference to arrange repair/replacement.Warranty valid for 12 months from date of purchase.
29/06/2017