Tripp Lite T015-POE Network and Power over Ethernet (PoE) Signal Tester with Carrying Case, AAA, Alkaline, 25.2 mm, 69.5 mm, 28.1 mm, 150 g
T015-POE Network and Power over Ethernet (PoE) Signal Tester with Carrying Case
Cable Tester Ensures Your Network and PoE Signals Function Properly Before Installation
The T015-POE Network and PoE Tester consists of an emitter and a remote. Its functions include standard and non-standard PoE equipment detection, PoE power online test, network cable continuity test, DC power test and switch loopback test. It is a practical tool for technical personnel to use during installation and maintenance of security monitoring equipment, communications wiring, integrated wiring and other weak-current systems.
Find Out Whats on the Line Before You Add More Devices
Before connecting more PoE devices and other network equipment to your STP or UTP Cat5/Cat6 cabling, find out what else is connected and how much power is running through the cable. This tester will detect switches, VoIP phones, security cameras and other devices on the line. It will also detect PoE devices and tell you how much power is passing through them. Finding out the amount of power draw ahead of time can prevent you from overloading the cable by adding more devices.
Features 3 Adjustable Test Modes: Continuity, Loop and Power
Quickly validating whether a faulty PoE cable is the issue in a malfunctioning application can save you time, trouble and money, as can detecting a faulty cable before you install it. The T015-POE flips from sync testing (Continuity) to loop testing to power consumption testing. It displays an 8-pin-to-pin wire map and shield connection status to ensure mapping continuity and proper configuration. It is able to test voltage, current and power between the power adapter and the powered device.
Easy to Store in Your Toolbox and Take to the Job Site
This PoE signal tester consists of a main emitter unit and a removable remote identifier that are secured in a protective carrying case when not in use. The emitter is powered by three AAA batteries, which are included (the remote unit requires no supplied power). To test a cable that has already been installed, separate the two units and connect them to each end of the cable.
Typical Application
Verify the performance of PoE cables in digital signage and security applications in commercial spaces
Test for short circuits and crossed connections during home theater or office audiovisual setups
Locate a faulty PoE cable in an installation
Introduction Bullets
Tests info of standard/non-standard PoE devices, such as voltage and polarity
Identifies power-supplying equipment type, 802.3af or 802.3at standard
Tests real-time power consumed by Power Delivery (PD) devices in PoE systems
Tests open, short and cross status in network cabling
Tests power consumed by DC applications and switchs loopback function
Package Includes
Emitter unit
Remote unit
Cable lead
(3) AAA batteries
Carrying case
Owners manualNetwork and Power over Ethernet (PoE) Signal Tester with Carrying Case
Tripp Lite T015-POE Network and Power over Ethernet (PoE) Signal Tester with Carrying Case. Battery type: AAA, Battery technology: Alkaline. Width: 25.2 mm, Depth: 69.5 mm, Height: 28.1 mm. Country of origin: China, Master (outer) case width: 280 mm, Master (outer) case length: 250 mm
2-year limited
22/02/2020