Veracity HIGHWIRE Powerstar Camera, 100 Mbit/s, 100Base-T, IEEE 802.3af, IEEE 802.3at, 100 Mbit/s, Full, Wired
HIGHWIRE Powerstar Camera
Veracity Vhw-Hwps-C Highwire Powerstar Ethernet And Poe Over Coax - Camera UnitHighwire Powerstartm Adds The Convenience Of Poe Over Coaxtm Technology And Gives The Reassurance Of Safeviewtm Monitoring To Veracity’S Industry-Leading Highwire Ethernet Over Coax Product Range. With No Need To Configure Ip Addresses Set Dip Switches Or Make AwkwardMeasurements And Calculations Installation Of Highwire Powerstartm Is As Straightforward As Plugging It In. In The Most Simple Implementation Shown Below The Base Unit Receives Poe Power From A Standard Poe Switch Or Injector And Transmits It Down The Coax. The Camera Unit Receives This Power And Forwards It On To The Ip Camera. No External Power Cabling Is Required And All Detection And Setup Occurs Automatically. If Poe Is Not Available Or For An Extra Power Boost At Either End Of The Cable Just Connect The Optional Power Supply.Powerstar Comprises 2 Partcodes (A Base Unit And A Camera Unit)The Unit Is Auto Sensing So Will Not Pass On Poe If It Is Not RequiredUpgrade Legacy Network To Poe Devices Without Re-CablingUse Poe Switch Or Optional 57V PsuDeliver Up To 25 Watts Of PoeMonitor Activity Over Entire Link Via Safeview Display At BaseInstall Poe Devices Up To 500M AwayNo Need To Locally Power CamerasAvoid Expensive Re-CablingCompact / Fits Inside Camera HousingRack Mountable With A Vhw-1U (8 Units To One 1U Rack)FeaturesTypeWired Dimensions W X D X H104 X 54 X 24 MmWeight0.140 KgFast Ethernet and POE over coax converter
Veracity HIGHWIRE Powerstar Camera. Maximum data transfer rate: 100 Mbit/s, Converter input interface: 100Base-T, Networking standards: IEEE 802.3af, IEEE 802.3at. Connectivity technology: Wired. Maximum transfer distance: 500 m. Product colour: Blue, Certification: FCC, CE, RoHS. Power consumption (typical): 1.5 W, Power consumption (max): 25 W
5 years
19/12/2015